translate

Monday, May 17, 2010

Mercedes-Benz automated test driver setup


Working on autonomous vehicle systems is all the rage lately, and Mercedes-Benz is no exception. Most of the work has been going within research groups and as part of competitions like the DARPA Urban Challenge. Mercedes-Benz has moved its automated driving work over to driver-assistance test groups. It's using the automation technology to evaluate crash avoidance systems without putting test drivers and engineers at risk.

By using its autopilot systems, the test maneuvers can be reproduced much more consistently. This isn't the first time that such systems have been employed in testing. Chrysler built an Automated Durability Road (ADR) at its Chelsea Proving Ground in the mid-1990s. The ADR used robotic drivers for accelerated durability testing over extremely difficult surfaces.

In both cases, the automakers can do far more extreme testing than would be possible with human drivers. Among the things Mercedes will be testing for is unintentional airbag deployments when driving over curbs, and detection of high-speed merging traffic or sudden braking.

via:autoblog





Press Release

Autopilots at Mercedes-Benz

"Automated driving" - new proving method for state-of-the-art safety systems


With an eye on future generations of assistance systems, Mercedes-Benz is the first vehicle maker worldwide to introduce an innovative proving method into its test driving portfolio - safety-critical driving manoeuvres that cannot be precisely reproduced by people are now being handled by autopilot on closed test tracks. "Automated driving" supports the development, testing and validation of assistance systems and other safety features. Testing at the limit can now be carried out without danger and health risks to development engineers, delivering clear benefits to Mercedes-Benz customers - because the tests are carried out with the highest degree of precision, future assistance systems can be developed and validated to Mercedes-Benz's exacting quality standards despite increasing levels of complexity.

For years, Mercedes-Benz has been setting benchmarks in the development of new technologies for the continuous improvement of active and passive safety in automobiles. Innovations in passive safety such as the rigid-form passenger cell, crumple zone, airbag and three-point safety belt, plus active safety like ABS, ESP® and braking assistant all trace back to Mercedes-Benz. They have made a demonstrable contribution to improving road safety and to reducing significantly the number of injuries and deaths among road users.

The current status of active safety technology is defined by intelligent assistance systems that turn the vehicle into a "thinking partner" - one that can see and feel, and that can react and function reflexively in the event of danger. Systems like the blind spot assistant, ATTENTION ASSIST and the night view assistant are focused specifically on accident problem areas like changing lane, fatigue or poor night time visibility.

"With future assistance systems, we will be able to address even more complex traffic situations and therefore to ease the dangers of further accident hot spots - like intersections," says Prof. Bharat Balasubramanian, Head of Product Innovations & Process Technologies at Corporate Research and Advanced Engineering Daimler AG. "The new automated driving test methods help us to fulfil the ex-tremely high quality and operational safety demands placed on our safety systems even more efficiently."

Autopilots ensure greater precision and relieve development engineers

In addition to established methods, Mercedes-Benz will in future fulfil requirements for reliable functionality and operational safety in future assistance systems through the "automated driving" of test manoeuvres on dedicated proving grounds. Prototypes used for this purpose are series production vehicles equipped with "robots" for steering, acceleration and braking. An on-board computer controls the autopilot so that a pre-programmed course is followed exactly - even if several vehicles are involved in one manoeuvre.

Test engineers in the control centre monitor all events and can stop the vehicles at any time. In parallel, the vehicles perform self checks and brake automatically if they register discrepancies. Thus, the test configuration is safe yet flexible. All Mercedes-Benz models can be equipped with the technical equipment for "automated driving". Moreover, a variety of different safety systems and equipment can be tested.

Using "automated driving", engineers analyse safety innovations under real-life conditions in the vehicle, addressing two critical challenges:

* Reproducibility. In order to calibrate the systems exactly, the same tests must be varied and repeated extensively. In so doing, all parameters like vehicle distances, speeds and steering radii must be exactly to specifications and always precisely maintained in order to guarantee comparability.
* Safety. Because the systems are intended to kick in only in critical situations, such scenarios must be induced during testing. The manoeuvres demand precision timing and cannot be permitted to put anyone in danger.

Both cases place human beings at their limits - in terms of their ability to react and the issue of reproducibility. However, for complex electronic systems and for assistance systems in particular, fully comprehensive functional validation must be carried out in a manner that is as close to reality as possible, thus making this kind of test driving indispensible.

The precise repeatability of the test methodology enables test vehicles to maintain exactly the pre-determined speed and course and to brake very precisely. For example, if a vehicle drives a pre-planned course several times, the tracks of all the runs vary from one another by less than two centimetres. Should the vehicle be brought to a complete halt at a particular location, the end points of all braking manoeuvres are within a radius of three centimetres.

Alongside the proving of assistance systems, "automated driving" will also be used in extreme tests in future. These put the vehicle under loads that are well in excess of those reached under normal use in traffic. The intention is to ascertain, for instance, that airbags are not activated unintentionally should the car be driven heavily over a ramp or against a kerb. Test drives that involve a high degree of physical stress for the driver can thus be avoided.

State-of-the-art test methods for the highest safety demands

In their development work, Mercedes-Benz engineers use the results from the company's in-house accident research, which delivers important findings. A variety of networked validation methods guarantee that the systems function reliably at the critical moment. Company philosophy insists that validation must go considerably farther than prescribed by regulatory standards. When it comes to passive safety, the internal company crash test requirements go well beyond meeting standard crash test requirements. The combination of computer simulations and real-life crash tests ensures passive safety to Mercedes-Benz standards.

Mercedes-Benz also makes use of state-of-the-art, networked test methods when it comes to active safety. Drive simulator tests combined with simulation procedures deliver a faster and more precise development process and complement test drives under real-life conditions.

"In Sindelfingen, we are currently building a new drive simulator. The state-of-the art technology of this equipment will make the future development of new safety systems even faster and more precise," confirms Balasubramanian.

Automated driving as the basis of future innovations

Mercedes-Benz is the only vehicle maker in the world to use "automated driving" as an additional element in the testing process. It will be used on dedicated proving grounds in tests that would be virtually impossible to reproduce manually, like merging at different speeds and distances; high-risk tests where, for example, a vehicle brakes heavily in front of another that swerves at the last minute; and safety-critical tests whereby, at an intersection, one vehicle crosses just in front of or behind the path of a second vehicle.

With "automated driving", Mercedes-Benz has developed a new, unique testing method for safety systems. It is yet further proof of the innovative power of Mercedes-Benz. The new test method guarantees the fast and efficient development of assistance systems to the highest levels of quality and reliability and also offers maximum safety at work for employees.

Bharat Balasubramanian sums up: "In order to be able to set trends in the field of safety in future, too, our test procedures must be able to keep pace with the wealth of ideas generated by our engineers. With automated driving, we feel we are well equipped for the development of the next generation of assistance systems."

0 comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...
Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Autos Cars New Designs - Premium Blogger Themes Powered by Blogger | DSW printable coupons